We use a Zona Razor Hand Saw to cut the block of carving wax for this
project. The model shown is 8 inches long with a thick kerf and 18 teeth per
inch. Zona Razor saws come in fine, ultra thin, medium and thick kerfs and are
excellent for wax working applications.
Design features a custom modeled frame with a dual purpose freeform
channel wall for setting the red accent gemstones and securing the drusy in
place. To make the base, we placed the drusy over the block of green carving
wax and traces the outline onto it with a scribe. Will use the outline as a
guide for modeling the frame. Dust the outline with talc to make it
more visible.
We then use a Foredom Drill Press and a cylinder bur for modeling the block of
carving wax. Here removing wax from the outside perimeter of the base.
Controls the power from the flexible shaft using the foot pedal. The
drill press is secured to the bench top so use both hands to safely
control and maneuver the block of carving wax. Carefully removes wax along
the guideline of the center stone. Use a smaller cylinder bur to remove wax around the inner portion of
the base.
With the wax rim built up on the edge of the base, shape it using a
cylinder bur and the Foredom Micro Motor high
variable speed for wax working and says the
flexibility of the cord between the control box and the high speed rotary
handpiece makes it simple to maneuver and offers the best control.
After shaping the wax that was added on the outer side of the base, she uses
the Micro Motor to remove all excess wax from it. There you have it! A custom made wax mold ready for casting!
